PCB
圓刀型切板機,分板機
Model AJC-02 |  |
解決PCB
合板作業分板時錫點,零件或線路因折板的應力而受損或產生潛在應力的風險,
一般用於刻有V-cut的PC板,
結構堅實,附定位系統. 刀片及導片均可配合PC板做微調, 切板速度可由切刀轉速做調整.
規格:
|
裝有線性滑軌，可提供精確的
平穩地夾持多連板 | 
可精細的控制導板深度（0.01mm），確認在PCB分板過程中不會發生錯誤。 |
可精確控製刀片深度（0.01mm），刀片可以重新磨刀使用 |
|
HS-NTG
圓刀型 PCB切板機,分板機
|
 
|
-
雙圓刀型採用145mm外徑刀具，經久耐用。
-
附切板定位系統，方便大量生產。
-
附輸送帶裝置，PC板切完後，直接送至生產線。
-
刀片及導片均可配合PC板做微調。
-
切板速度可由切刀轉速做調整。
-
機械結構堅實,解決PCB
合板作業分板時錫點,零件或線路因折板的應力而受損或產生潛在應力的風險,
一般用於刻有V-cut的PC板,
規格:
|
|
走刀型PCB切板機
AJC-20
|
由上圓刀及下直線刀具，PC板固定置於下刀上，圓刀以移動的方式切割刻有V槽的PC板，以此機器分割，可減少切割應力，防止焊點龜裂。使用強力直流馬達，無干擾。
可預先設定訂切割開始及終止位置。
規格:
電壓：
AC 110V or 220V
切板速度：
最大400mm/Sec ，
無段調整
切板寬度: 最寬420mm
零件高度: PCB上方最高30mm, 下方:15mm
PCB 厚度範圍: 0.4mm ~2.0mm V槽PCB
重量：
45kg
外型尺寸：78cm
x 38cm x 40cm |
PCB Depaneling machine, PCB Separator,PCB singulation
Model NTG-4, NTG4A |
 |
Economical production of PCBs in panel boards is often put at risk at the separation stage by the "breaking" method because
components and strip conductors are often damaged.
In order to reduce bending tension during PCB separation, the
manual machine "NTG-4" and the motorized machine NTG-4A
depanel prescored panels by means of two round knives.
Both knives and guiding blades can be continuously adjusted in
height. The ergonomic construction of the machine enables a
high output rate.
The upper knife of the motorized machine NTG-4A is driven by a
toothed belt. This enables non tiring and efficient working. The
drive has a forward and return motion and it𠏋 speed is
continuously adjustable.
The depaneling machines NTG-4 and NTG-4A are characterized
by their simple operation and ergonomic design.
The new design of the machines with an opening of
87 mm enables the depaneling of panelboards which are
assembled with components up to 47 mm height right up to
the scoring line! |
| Specification: |
NTG4 |
NTG4A |
Separation length
Max. component height Definitely speed
Weight
Drive |
330mm
47mm
Manual
21kgs
Manual |
330mm
47mm
0~500mm/s
25Kgs
Electrical 230V/115V |
|
