PCB lead cutter

	www.hosotec.com

PCB Lead Cutter

HS-8 PCB lead cutter, manual handling

Economical solution to trim the PCB leads after soldering. Equipped with re-sharpenable tungsten carbide cutting blades. with reversible PCB tracks for both the range of PCB thickness 0.8mm ~1.2mm and 1.6mm ~2.0mm

HS-66 Automatic PCB lead cutter, automatic feeding.

Feeding speed adjustable up to 3 M/minute. with warp prevention device to ensure no damage on board during trimming. PCB pallet carrier unnecessary. PCB width Up to 300mm.
　

HS-66B Automatic PCB lead cutter integrated with brushing system

Automatic cutting the wire lead after soldering and brushing out the solder residual and lead adhered.

Feeding speed adjustable up to 3 M/minute. with warp prevention device to ensure no damage on board during trimming. PCB pallet carrier unnecessary. PCB width Up to 300mm.
　

HS-22 Double blade PCB lead cutter, automatic feeding with brush.

Offset double blades design to trim the extra long leads automatically and with additional brushing system. The effective cutting area up to 420mm . The PCB residues after soldering and leads adhere on the boards after trimming can be easily removed by the equipped brush system.
Equipped with adjustable warp correction device in which correct the warp condition of PCB before soldering process.
　

HS-680 Cutting blade sharpening machine

With build-in coolant system and working in close cabinet. Prevent high heat during re-grinding and ensure dust free in process.

HS-83 Brushing machine

Brushing out the soldering residue or leads adhered on the board after trimming.

NK-200, NK-250 Tungsten carbide blade

For PCB lead cutter. OD in 200mm or 250mm

Hosotec Technology Co.,Ltd
Tel: +886 2 2204 5225 FAX : +886 2 2204 5332
Cell: +886 919 269 106
Address : No.16, Ln. 42, Qionglin S. Rd., Xinzhuang Dist., New Taipei City 24263, Taiwan
e- mail : info@hosotec.com

24263台灣新北市新莊區瓊林南路42巷16號
Tel: 02 2204 5225 Fax: 02 2204 5332 手機: 0919 269 106
e-mail: info@hosotec.com